Not a Current Stock Product
Please contact our team for assistance.
Please contact our team for assistance.
Autoadhesivo
Latex
Latex
Film
A 1.5 mil matte clear film with excellent ink receptivity and printability.
Tipo
Film
Tensile MD
20 Lbs/in
Tensile CD
25 Lbs/in
Elong MD
325
| Propiedades | Valor |
|---|---|
| Espessor | 1.50 Mil |
RoHS
Si
Prop65
Si
REACH
Si
TPCH
Si
CPSIA
Si
UL
No
FSC
No
An outstanding general purpose permanent opaque adhesive that has high initial tack and high ultimate adhesion. It is recommended for high speed wide web processing and can be used on many different substrates. Displays excellent die-cutting and stripping traits. Provides opacity for cover up applications.
Tipo
Permanent
Composición
Latex
Shear
80
| Propiedades | Valor |
|---|---|
| Stainless Steel | 7.3 lbs/linear in. |
| Adhesividad Vidrio | 5,7 lbs/linear in. |
| Polyethylene | 6,5 |
| Corrugated | 2.50 lbs./in. |
| Painted Metal | 7.0 lbs/linear in. |
| Loop Tack | 5.00 oz/in² |
RoHS
Si
Prop65
No
REACH
Si
TPCH
Si
CPSIA
Si
Contacto directo con los alimentos
No
Contacto indirecto con los alimentos
Si
An improved general purpose permanent rubber based adhesive which has high initial tack and high ultimate adhesion. It is recommended for high speed wide web processing and can be used on many different substrates. Displays excellent die-cutting & stripping traits.
Tipo
Permanent
Composición
Latex
| Propiedades | Valor |
|---|---|
| Adhesividad Vidrio | 5.7 lbs/linear in. |
| Polyethylene | 6,5 |
RoHS
Si
Prop65
No
REACH
Si
TPCH
Si
CPSIA
Si
Contacto directo con los alimentos
No
Contacto indirecto con los alimentos
Si
A clear silicone coated polyester film with extremely high internal strength, excellent dimensional stability, low heat shrinkage, excellent stiffness, high clarity and extreme surface smoothness. It is used widely in pressure sensitive tape and medical applications.
Tipo
19740
Tensile MD
32000 PSI
Tensile CD
0
Tear MD
0
Tear CD
200 Grams
| Descripción | Valor |
|---|---|
| Espessor | 1.42 Mil |
RoHS
Si
Prop65
Si
REACH
Si
TPCH
Si
CPSIA
Si
UL
No
Contacto directo con los alimentos
No
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products
Dirección:
Beontag
Avenida Presidente Kennedy, 2427 - Jardim Lar Parana
Campo Mourão - PR, Brasil
+55 (44) 3518-3500