Subscribe to our newsletter!Stay up to date, subscribe to our newsletter!
SubscribeSelf adhesives
Hot Melt
SSP 50N
Film
ScandSynTherm is a top coated, smudgeproof, chemi-thermal PP-film. - ScandSynTherm can be printed by water/solvent based, UV inks and varnishes. - This thermal product has a standard sensitivity making it suitable for print speeds up to 150mm per second - depending on printer settings. - It is recommended that customers assess both the pre-print and the overprint characteristics under end use - conditions before proceeding to long runs.
Face material has a slight tendency to discolour, but this does not affect the scannability of the barcodes.
Type
Film
Printing speed (Max.)
150mm/s
| Properties | Method | Value |
|---|---|---|
| Basis Weight | ISO 536 | 80 ± 3g/m² |
| Caliper | ISO 534 | 99 ± 3µ |
ScandStick Permanent 50N has excellent initial tack with high bond strength at elevated, room and chilled temperatures, as well as in moist conditions. It has been formulated to adhere to a wide variety of substrates, including corrugated cardboard, low surface energy materials like polyethylene and non-polar surfaces. SSP 50N provides enhanced conversion characteristics, allowing die-cutting at higher speeds and is designed for both paper and synthetic face materials. Limitation: Not suitable for labelling plasticised PVC.
General purpose chill permanent
Type
Permanent
Composition
Hot Melt
Composition
SSP 50N
Min. Application Temperature
-5ºC
Min. Service Temperature
-40ºC
Max. Service Temperature
70ºC
Food contact
Meets composition requirement of indirect food additives regulation FDA175.105, BfR XIV.
ISEGA approved for direct contact with dry and moist non-fatty foods
Yes
HG0 glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.
Type
Paper
| Description | Method | Value |
|---|---|---|
| Caliper | ISO 534 | 47 ± 4µm |
| Transparency | ISO 2469 | 46% |
| Description | Value |
|---|---|
| Typical Caliper | 160 ± 16µ |
Format
Roll
Regulations
Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BgVV XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs. Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998.
Material Shelf Life
12 months stored at 20ºC/50% RH
SKU
355200J0N100
Replaces all previous information.
Last update: 01/05/2024
1. All information, recommendations and descriptions of our Products are based on research, tests and data believed to be reliable and as such they must be considered as a guide and not as a guarantee nor a warranty. 2. Tests must be conducted by the customer to determine suitability of the products for their purposes and/or ambient, in any application and condition. 3. This document is valid only as information and can be revised without notice. For values and other technical product specifications, contact our Sales or Technical Department.
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com
Our team of experts is ready to assist you and improve your business.
