Subscribe to our newsletter!Stay up to date, subscribe to our newsletter!
SubscribeSelf adhesives
Hot Melt
SSP 90
Film
ScandFilm PP96 MW is a matt, white, topcoated, orientated polypropylene film. The matt surface has - characteristics which makes it very suitable for thermal transfer printing. - ScandFilm PP96 MW has good resistance to moisture, oils and many chemicals. When applied to - polypropylene items, ScandFilm PP96 MW can be recycled. The film is free from vinyl chloride and will not - create undesirable atmospheric emissions when burnt. - ScandFilm PP96 MW can be printed by flexography, screen, letterpress, offset lithography.
Type
Film
| Properties | Method | Value |
|---|---|---|
| Basis Weight | ISO 536 | 78 ± 3g/m² |
| Caliper | ISO 534 | 95 ± 5µ |
| Gloss | ASTM D2457 (45°) | 63% |
SSP 90 is a very aggressive adhesive, specially designed for use on difficult and rough surfaces. Typical use is - tyre labelling. - The increased coat-weight could hava a negative effect on conversion speed and adhesive set-off on diecutting - tools.
Heavy duty speciality permanent
Type
Permanent
Composition
Hot Melt
Composition
SSP 90
Min. Application Temperature
5ºC
Min. Service Temperature
-20ºC
Max. Service Temperature
70ºC
ISEGA approved for direct contact with dry and moist non-fatty foods
No
HG0 glassine backing allows high speed conversion and consistent dispensing on a wide range of equipment.
Type
Paper
| Description | Method | Value |
|---|---|---|
| Caliper | ISO 534 | 47 ± 4µm |
| Transparency | ISO 2469 | 46% |
| Description | Value |
|---|---|
| Typical Caliper | 154 ± 15µ |
Format
Roll
Regulations
Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BgVV XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs. Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998.
Material Shelf Life
12 months stored at 20ºC/50% RH
SKU
713600P1N200
Replaces all previous information.
Last update: 01/05/2024
1. All information, recommendations and descriptions of our Products are based on research, tests and data believed to be reliable and as such they must be considered as a guide and not as a guarantee nor a warranty. 2. Tests must be conducted by the customer to determine suitability of the products for their purposes and/or ambient, in any application and condition. 3. This document is valid only as information and can be revised without notice. For values and other technical product specifications, contact our Sales or Technical Department.
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com
Our team of experts is ready to assist you and improve your business.
