Subscribe to our newsletter!Stay up to date, subscribe to our newsletter!
SubscribeSelf adhesives
Hot Melt
Paper
Scandtherm NTC P-F is a Phenol Free, woodfree label paper coated with thermosensitive dyes which turn black - when heated. - Designed for non-hostile environments and low risk conditions where there is no requirement for surface - protection against contaminants or scuffing, ScandTherm NTC P-F should be used only in relatively clean, dry - environments for short term labelling applications. - ScandTherm NTC P-F can be printed using water based and UV inks, designed for use with direct thermal label - papers, but it is not varnishable. - This thermal paper has a standard sensitivity making it suitable for print speeds up to 200-250mm per second - depending on printer settings, or to enable the thermal head temperatures to be reduced to improve the - longevity of the print head. - It is recommended that customers assess both the pre-print and the overprint characteristics under end use - conditions before proceeding to long runs.
Type
Paper
Printing speed (Max.)
200 - 250mm/s
| Properties | Method | Value |
|---|---|---|
| Basis Weight | ISO 536 | 68 ± 5g/m² |
| Caliper | ISO 534 | 74 ± 5µ |
FSC
Yes
ScandStick Permanent 50N has excellent initial tack with high bond strength at elevated, room and chilled temperatures, as well as in moist conditions. It has been formulated to adhere to a wide variety of substrates, including corrugated cardboard, low surface energy materials like polyethylene and non-polar surfaces. SSP 50N provides enhanced conversion characteristics, allowing die-cutting at higher speeds and is designed for both paper and synthetic face materials. Limitation: Not suitable for labelling plasticised PVC.
General purpose chill permanent
Type
Permanent
Composition
Hot Melt
Min. Application Temperature
-5ºC
Min. Service Temperature
-40ºC
Max. Service Temperature
70ºC
| Properties | Method | Value |
|---|---|---|
| Peel | FTM 1 (20 min) | 19N |
| Tack | FTM 9 | 18N |
Direct Food
Yes
Indirect Food
Yes
Food contact
Meets composition requirement of indirect food additives regulation FDA175.105, BfR XIV.
ISEGA approved for direct contact with dry and moist non-fatty foods
Yes
HG6 honey glassine backing allows high speed conversion and consistent dispensing on a wide range of - equipment.
Type
Paper
| Description | Method | Value |
|---|---|---|
| Basis Weight | ISO 536 | 45 ± 3g/m² |
| Caliper | ISO 534 | 41 ± 3µ |
| Transparency | ISO 2469 | 57% |
| Description | Value |
|---|---|
| Typical Caliper | 123 ± 12µ |
Format
Roll
Certificate
The product is registered to SAI-COC-010567 FSC ™ Mix credit.
Regulations
Food Packaging Applications: The adhesive raw materials are listed under European/US food packaging regulations (BgVV XIV or FDA 21 175.105) and are safe for use in limited contact with foodstuffs. Toy and Packaging Regulations: The materials used have been tested and comply with the current heavy metals regulations EN71-3 Safety of Toys and the UK Packaging (Essential Requirements) Regulations 1998.
Material Shelf Life
12 months stored at 20ºC/50% RH
SKU
F209045J0N000
Replaces all previous information.
Last update: 01/05/2024
1. All information, recommendations and descriptions of our Products are based on research, tests and data believed to be reliable and as such they must be considered as a guide and not as a guarantee nor a warranty. 2. Tests must be conducted by the customer to determine suitability of the products for their purposes and/or ambient, in any application and condition. 3. This document is valid only as information and can be revised without notice. For values and other technical product specifications, contact our Sales or Technical Department.
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com
Our team of experts is ready to assist you and improve your business.
