Change country/region?

You're viewing our available portfolio for

Our portfolio may vary depending on your location. Please choose the region or country according to where you are.

Change my country/region
Logo
Go back

Not a Current Stock Product

Please contact our team for assistance.

Self adhesives

Acrylic

Paper

55# Semigloss / TP170 @ 1.30 Cwt. / TP170 @ 1.30 Cwt. / 1.2 mil Clear Polyester Liner / 40#SCK BASE LINER

Datasheet

Facestock

A calendar coated one side semigloss stock with excellent ink receptivity and print characteristics. This stock offers an 88% brightness and opacity and a 70% gloss rating.

Type

Paper

Tensile CD

16 lb/in

Tear MD

51 g

PropertiesValue
Basis Weight55 lb/3300sf
Caliper2.9 mil

Regulatory Approval

RoHS

Yes

Prop65

Yes

REACH

Yes

TPCH

Yes

CPSIA

Yes

UL

No

FSC

No

Adhesive

A general purpose acrylic adhesive showing good initial tack with high shear and high ultimate adhesion. It has good plasticizer, UV and solvent resistance. This adhesive displays excellent die-cutting and stripping characteristics and has good adhesion to many different substrates.

Type

Permanent

Composition

Acrylic

Shear

300

Min. Application Temperature

35ºC

Min. Service Temperature

-65ºC

Max. Service Temperature

180ºC

PropertiesValue
Stainless Steel5.2 lbs/linear in.
Typical Peel Adhesion3,2lbs/linear in.
Polyethylene1.6
Corrugated1.40 lbs./in.
Painted Metal5.2 lbs/linear in.
Loop Tack2.20 oz/in²

Regulatory Approval

RoHS

Yes

Prop65

No

REACH

Yes

TPCH

Yes

CPSIA

Yes

Direct Food

No

Indirect Food

Yes

Backing

An economical 1.2 mil clear polyester film liner good for an array of prime label applications.

Tensile MD

30000

Tensile CD

0

Tear MD

0

Tear CD

0

DescriptionValue
Basis Weight0
Caliper1,2

Regulatory Approval

RoHS

Yes

Prop65

Yes

REACH

Yes

TPCH

Yes

CPSIA

Yes

Backing

Supercalendered Kraft (SCK liner). This paper has a smooth surface with a consistent caliper. Due to its high internal strength, it will withstand all conventional processing operations including die-cutting, butt cutting, line scoring and dispensing.

Type

18840

Tensile MD

34

Tensile CD

22

Tear MD

32

Tear CD

34

DescriptionValue
Basis Weight40
Caliper2.5

Regulatory Approval

RoHS

Yes

Prop65

Yes

REACH

Yes

TPCH

Yes

CPSIA

Yes

UL

No

Direct Food

No

WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products.

Address:

Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden

+46 42 25 00 50
orders.scandstick@beontag.com

Share it

whatsapp share