Not a Current Stock Product
Please contact our team for assistance.
Please contact our team for assistance.
Self adhesives
Acrylic
Film
A 2 mil clear biaxially oriented polypropylene with exceptional clarity, excellent die-cut performance and great stiffness. Coated gloss surface is print receptive for standard methods.
Type
Film
Tensile MD
20,000 psi
Tensile CD
35,000 psi
Elong MD
180
Elong CD
55%
| Properties | Value |
|---|---|
| Caliper | 2.00 Mil |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
FSC
No
An all temperature and freezer grade acrylic adhesive with good initial tack and high ultimate adhesion when applied at temperatures as low as -20 F. Excellent permanency at room temperatures. Very good plasticizer, UV and solvent resistance. This adhesive offers a neutral ph level (Acid Free)
Type
Permanent
Composition
Acrylic
Shear
100
Min. Application Temperature
-20ºC
Min. Service Temperature
-65ºC
Max. Service Temperature
160ºC
| Properties | Value |
|---|---|
| Stainless Steel | 5.1 lbs/linear in. |
| Typical Peel Adhesion | 4,4 lbs/linear in. |
| Polyethylene | 4.2 |
| Corrugated | 1.50 lbs./in. |
| Painted Metal | 4.9 lbs/linear in. |
| Loop Tack | 2.90 oz/in² |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
Direct Food
Yes
Indirect Food
Yes
WG0 2 mil White glassine backing allows high speed conversion and consistent dispensing on a wide range of - equipment
Type
ScandStik liner
| Description | Value |
|---|---|
| Basis Weight | 0 |
| Caliper | 2 |
RoHS
Yes
Prop65
Yes
REACH
Yes
TPCH
Yes
CPSIA
Yes
UL
No
Direct Food
No
WARRANTY: All data obtained through ASTM standards and are typical and should not be used for specification purposes. Because of the variety of possible uses, the buyer should test the suitability of each intended use. The buyer assumes all risks in connection with such use. BEONTAG will not be liable for damages in excess of the purchase price of Products or for incidental or consequential damages.
BEONTAG warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year after the initial date of shipment (unless otherwise stated), BEONTAG shall, upon notification thereof and substantiation that the products have been stored and applied in accordance with BEONTAG'S standards, correct such defects by suitable repair or replacement without charge at BEONTAG's plant or at the location of the products (at BEONTAG's election); provided, however, if BEONTAG determines that repair or replacement is not commercially practical, BEONTAG shall issue a credit in favor of BUYER in an amount not to exceed the purchase price of the products.
Address:
Beontag
Pål Anders väg 4, 263 35
Höganäs, Sweden
+46 42 25 00 50
orders.scandstick@beontag.com